Differences

This shows you the differences between two versions of the page.

--- peri:peri [2025/09/09 08:33] – [Debian 7 Cuda 6] 2a00:1028:8390:729e:21d:7dff:fed0:308a
+++ peri:peri [2025/10/21 16:00] (current) – 2001:718:2:1901:0:1:e78f:e48d
@@ Line 1: / Line 1: @@
-Priklady http://gitlab.fjfi.cvut.cz/culikzde/peri
+Priklady http://gitlab.fjfi.cvut.cz/culikzde/peri-2025
+Letosni priklady http://gitlab.fjfi.cvut.cz/culikzde/peri-2025
 ====== Literatura ======
@@ Line 708: / Line 710: @@
 http://en.wikipedia.org/wiki/CUDA
+https://www.nvidia.com/en-in/geforce/drivers/
 <code>
@@ Line 725: / Line 729: @@
 <code>
 GeForce 8600GT, G84, compute capability 1.1, Cuda 1.1 .. 6.5, Nvidia Driver 304 or 340
-SM = 32 SP, Fedora 20, Debian 8,
+SM = 32 SP, Fedora 20, Debian 8, Debian 7
 G86M, compute capability 1.1
@@ Line 1168: / Line 1172: @@
 <code>
-apt install nvidia-driver nvidia-xconfig nvidia-smi nvidia-cuda-toolkit
+apt install nvidia-driver xserver-xorg-video-nvidia nvidia-xconfig nvidia-smi nvidia-cuda-toolkit
 </code>
@@ Line 1180: / Line 1184: @@
 <code>
-apt install xserver-xorg-video-nvidia nvidia-smi nvidia-cuda-toolkit
+apt-get install xserver-xorg-video-nvidia nvidia-xconfig nvidia-smi nvidia-cuda-toolkit
 </code>
@@ Line 1760: / Line 1764: @@
 }
-menuentry "System Rescue CD 11.03 (64-bit)" {
+menuentry "System Rescue CD 12.02 (64-bit)" {
-   set device="/dev/..."
+   set root=(hd0,1)
-   set isofile="/systemrescue-11.03-amd64.iso"
+   set device="/dev/sda1"
-   set dir="sysreccd/boot"
+   set dir="/sysrcd-12.02"
+   linux $dir/sysresccd/boot/x86_64/vmlinuz archisodevice=$device archisobasedir
+=$dir/sysresccd
+   # copytoram
+   # archisolabel=
+   initrd $dir/sysresccd/boot/intel_ucode.img
+   initrd $dir/sysresccd/boot/amd_ucode.img
+   initrd $dir/sysresccd/boot/x86_64/sysresccd.img
+}
+menuentry "System Rescue CD 12.02 (64-bit) (loopback)" {
+   set root=(hd0,1)
+   set device="/dev/sda1"
+   set isofile="/sysrcd/systemrescue-12.02-amd64.iso"
    loopback loop $isofile
-   linux (loop)/$dir/x86_64//vmlinuz-linux img_dev=$device img_loop=$isofile earlymodules=loop copytoram
+   linux (loop)/sysresccd//boot/x86_64/vmlinuz img_dev=$device img_loop=$isofile earlymodules=loop archisobasedir=sysresccd
-   initrd (loop)/$dir/intel-ucode.img
+   # img_label=
-   initrd (loop)/$dir/amd-ucode.img
+   initrd (loop)/sysresccd/boot/intel_ucode.img
-   initrd (loop)/$dir/x86_64/initramfs-linux.img
+   initrd (loop)/sysresccd/boot/amd_ucode.img
+   initrd (loop)/sysresccd/boot/x86_64/sysresccd.img
 }
-</code>
 https://github.com/alfredopalhares/Archiso/blob/master/README
@@ Line 2841: / Line 2858: @@
 --------
+====== Termux ======
+[[termux]]
 ======Numerika======
@@ Line 3413: / Line 3435: @@
 https://github.com/calint/tang-nano-9k--riscv
+https://github.com/ghaiklor/arves (ghdl)
+https://numato.com/kb/mimas-a7-mini-microblaze-and-linux-how-to-run-linux-on-mimas-a7-mini-fpga-development-board-2/
+https://github.com/SalvatoreBarone/CNN-VHDL (neural network, ghdl)
+https://github.com/gabrieljcs/ann-vhdl
@@ Line 3693: / Line 3723: @@
 https://gcc.gnu.org/onlinedocs/gcc-3.3.6/gccint/Types.html
+MiniOS (Slax) https://github.com/minios-linux/minios-live/wiki/Building-MiniOS